藍屏代碼0x000001C6代表"FAST_ERESOURCE_PRECONDITION_VIOLATION"，這意味著在嘗試訪問快速資源（Fast Eresource）時發生了前置條件違規錯誤。這種錯誤通常是由于對快速資源的非法操作或無效使用引起的，導致系統崩潰并顯示藍屏錯誤。

快快藍屏修復助手

文件大小：5.70 MB軟件平臺：WinAll

快快藍屏修復助手可以幫你修復各類藍屏異常和錯誤問題，能快速檢測軟件、硬件和驅動故障。分析藍屏日志。

立即下載

要解決這個問題，可以嘗試以下方法：

方法一：清理注冊表

使用可靠的注冊表清理工具檢測和修復注冊表中任何損壞的項，以確保系統的穩定性。

方法二：清理內存

使用Windows的內存診斷工具（Windows Memory Diagnostic）檢測并修復內存相關問題。

方法三：禁用或更新防病毒軟件

某些防病毒軟件可能與特定驅動程序沖突，導致藍屏錯誤,嘗試禁用或卸載防病毒軟件，或者更新到最新版本。

方法四：使用一鍵修復工具助手（強烈推薦）

1、首先你的電腦必須下載與完成安裝完成快快藍屏修復助手。如果你還沒有安裝點擊下方鏈接下載。

下載地址：>>>快快藍屏修復助手<<<

提示：安裝路徑不要選擇C盤，避免產生問題造成損失。

2、找到你電腦中的快快藍屏修復助手，點擊進入。看到首頁后，點擊首頁一鍵掃描按鈕開始掃描。等待幾分鐘，就能獲取你急切想要的結果。

3、掃描完成后會顯示電腦的所有藍屏記錄以及藍屏的詳細信息。

4、解決方案頁面顯示了導致該次藍屏的具體原因和解決方案，點擊右上角的一鍵修復進行修復。

5、切記，當修復完成之后我們還是需要重新啟動計算機的。畢竟一切修復的結果，需要重新后，才能被系統認可。

當你完成重啟后，你電腦的藍屏問題已經基本解決了。相信小編，不要急需卸載快快藍屏修復助手。畢竟它強大的功能是你未來的一個保障，可以隨時隨地為你服務，讓你再次遇到藍屏問題不在抓狂。

其他相關信息：

FAST_ERESOURCE_PRECONDITION_VIOLATION bug 檢查值為 0x000001C6。 它指示當前線程正在對快速資源例程執行無效調用。

FAST_ERESOURCE_PRECONDITION_VIOLATION參數

沖突類型

0x0 : The Irql of the caller was greater than the maximum allowed Irql for the routine. 2 - Irql of the caller. 3 - Maximum allowed Irql of the routine. 0x1 : The caller specified an invalid (i.e. uninitialized) owner entry. 2 - Pointer to the owner entry. 0x2 : The caller specified an owner entry that was already associated with a lock acquisition. 2 - Pointer to the owner entry. 3 - Pointer to the resource to which the owner entry is already associated. 0x3 : The caller passed a legacy resource to a fast resource routine. 2 - Pointer to the resource. 0x4 : The caller specified a resource that has outstanding lock acquisitions. 2 - Pointer to the resource. 0x5 : The caller was executing inside of a DPC. 0x6 : The caller was executing inside of a Special Kernel APC. 0x7 : The caller did not ensure Normal Kernel APCs were disabled. 0x8 : The caller specified an owner entry that was not associated with a lock acquisition of the specified resource. 2 - Pointer to the resource specified. 3 - Pointer to the owner entry. 4 - Pointer to the resource with which the owner entry is associated. 0x9 : The caller specified an owner entry that was not associated with the calling thread. 2 - Pointer to the owner entry. 3 - Pointer to the thread with which the owner entry is associated. 0xa : The caller specified an owner entry which has been disowned. 2 - Pointer to the owner entry. 0xb : The caller specified an owner entry with a different acquisition type than the caller indicated. 2 - Pointer to the owner entry. 3 - High-16 bits indicate the acquisition type of the owner entry. Bottom-16 bits indicate the acquisition type specified. 1 = Shared, 0 = Exclusive. 0xc : The caller specified an owner entry that was not associated with a lock acquisition of the specified resource. 2 - Pointer to the resource specified. 3 - Pointer to the owner entry. 4 - Pointer to the resource with which the owner entry is associated. 0xd : The caller specified an owner entry that has not been disowned. 2 - Pointer to the owner entry. 0xe : The caller passed a fast resource to a legacy routine that does not support fast resources. 2 - Pointer to the resource. 0xf : The caller passed a fast resource to a legacy routine that supports fast resources, but the fast resource was not initialized with EX_FAST_RESOURCE_ENABLE_LEGACY_APIS. 2 - Pointer to the resource. 0x10 : The caller passed invalid flags to ExInitializeFastResource. 2 - Pointer to the resource specified. 3 - The flags specified. 0x11 : The caller passed a thread other than the current thread to ExReleaseResourceForThreadLite. 2 - Pointer to the resource specified. 3 - The thread specified. 0x12 : The caller attempted to disown a resource that had been recursively acquired exclusive by the current thread. 2 - Pointer to the resource specified. 0x13 : The caller attempted to convert a resource acquisition while the calling thread had outstanding recursive acquisitions of the resource. 2 - Pointer to the resource specified. 0x14 : A thread exited with outstanding lock acquisitions. 2 - The thread. 3 - Pointer to one of the outstanding owner entries. 0x15 : A thread exited with outstanding disowned lock acquisitions. 2 - The thread. 3 - Pointer to one of the outstanding owner entries. 0x16 : A call to ExConvertExclusiveToSharedLite was made by a thread that did not hold the specified resource exclusive. 2 - Pointer to the resource. 3 - Pointer to the thread.

原因

當前線程正在對快速資源例程執行無效調用。

解決方法

!analyze 調試擴展顯示有關 bug 檢查的信息，并有助于確定根本原因 。

另請參閱

Bug 檢查代碼參考