藍屏代碼0x000001C6表示"FAST_ERESOURCE_PRECONDITION_VIOLATION"，即快速資源預條件違規。這個錯誤通常發生在Windows操作系統中的關鍵資源管理過程中，它可能是由于資源鎖定、線程同步或其他內部操作的錯誤導致的。這個錯誤代碼指示了系統在處理資源的過程中發生了違反預期的錯誤，從而導致系統崩潰并顯示藍屏錯誤。

快快藍屏修復助手

文件大小：5.70 MB軟件平臺：WinAll

快快藍屏修復助手可以幫你修復各類藍屏異常和錯誤問題，能快速檢測軟件、硬件和驅動故障。分析藍屏日志。

立即下載

要解決這個問題，可以嘗試以下方法：

方法一：進行全面的病毒掃描

運行可靠的防病毒軟件進行全面的掃描，以查找并清除計算機中的任何潛在惡意軟件或病毒。

方法二：更新操作系統

確保您的Windows操作系統是最新的版本，并且所有可用的更新和補丁已安裝,您可以通過訪問Windows更新中心或運行Windows更新來檢查和安裝最新的更新。

方法三：修復系統文件錯誤

運行系統文件檢查工具（SFC）以檢測和修復任何損壞的系統文件,打開命令提示符并以管理員身份運行" sfc /scannow "命令。

方法四：使用一鍵修復工具助手（強烈推薦）

1、首先你的電腦必須下載與完成安裝完成快快藍屏修復助手。如果你還沒有安裝點擊下方鏈接下載。

下載地址：>>>快快藍屏修復助手<<<

提示：安裝路徑不要選擇C盤，避免產生問題造成損失。

2、找到你電腦中的快快藍屏修復助手，點擊進入。看到首頁后，點擊首頁一鍵掃描按鈕開始掃描。等待幾分鐘，就能獲取你急切想要的結果。

3、掃描完成后會顯示電腦的所有藍屏記錄以及藍屏的詳細信息。

4、解決方案頁面顯示了導致該次藍屏的具體原因和解決方案，點擊右上角的一鍵修復進行修復。

5、切記，當修復完成之后我們還是需要重新啟動計算機的。畢竟一切修復的結果，需要重新后，才能被系統認可。

當你完成重啟后，你電腦的藍屏問題已經基本解決了。相信小編，不要急需卸載快快藍屏修復助手。畢竟它強大的功能是你未來的一個保障，可以隨時隨地為你服務，讓你再次遇到藍屏問題不在抓狂。

其他相關信息：

FAST_ERESOURCE_PRECONDITION_VIOLATION bug 檢查值為 0x000001C6。 它指示當前線程正在對快速資源例程執行無效調用。

FAST_ERESOURCE_PRECONDITION_VIOLATION參數

沖突類型

0x0 : The Irql of the caller was greater than the maximum allowed Irql for the routine. 2 - Irql of the caller. 3 - Maximum allowed Irql of the routine. 0x1 : The caller specified an invalid (i.e. uninitialized) owner entry. 2 - Pointer to the owner entry. 0x2 : The caller specified an owner entry that was already associated with a lock acquisition. 2 - Pointer to the owner entry. 3 - Pointer to the resource to which the owner entry is already associated. 0x3 : The caller passed a legacy resource to a fast resource routine. 2 - Pointer to the resource. 0x4 : The caller specified a resource that has outstanding lock acquisitions. 2 - Pointer to the resource. 0x5 : The caller was executing inside of a DPC. 0x6 : The caller was executing inside of a Special Kernel APC. 0x7 : The caller did not ensure Normal Kernel APCs were disabled. 0x8 : The caller specified an owner entry that was not associated with a lock acquisition of the specified resource. 2 - Pointer to the resource specified. 3 - Pointer to the owner entry. 4 - Pointer to the resource with which the owner entry is associated. 0x9 : The caller specified an owner entry that was not associated with the calling thread. 2 - Pointer to the owner entry. 3 - Pointer to the thread with which the owner entry is associated. 0xa : The caller specified an owner entry which has been disowned. 2 - Pointer to the owner entry. 0xb : The caller specified an owner entry with a different acquisition type than the caller indicated. 2 - Pointer to the owner entry. 3 - High-16 bits indicate the acquisition type of the owner entry. Bottom-16 bits indicate the acquisition type specified. 1 = Shared, 0 = Exclusive. 0xc : The caller specified an owner entry that was not associated with a lock acquisition of the specified resource. 2 - Pointer to the resource specified. 3 - Pointer to the owner entry. 4 - Pointer to the resource with which the owner entry is associated. 0xd : The caller specified an owner entry that has not been disowned. 2 - Pointer to the owner entry. 0xe : The caller passed a fast resource to a legacy routine that does not support fast resources. 2 - Pointer to the resource. 0xf : The caller passed a fast resource to a legacy routine that supports fast resources, but the fast resource was not initialized with EX_FAST_RESOURCE_ENABLE_LEGACY_APIS. 2 - Pointer to the resource. 0x10 : The caller passed invalid flags to ExInitializeFastResource. 2 - Pointer to the resource specified. 3 - The flags specified. 0x11 : The caller passed a thread other than the current thread to ExReleaseResourceForThreadLite. 2 - Pointer to the resource specified. 3 - The thread specified. 0x12 : The caller attempted to disown a resource that had been recursively acquired exclusive by the current thread. 2 - Pointer to the resource specified. 0x13 : The caller attempted to convert a resource acquisition while the calling thread had outstanding recursive acquisitions of the resource. 2 - Pointer to the resource specified. 0x14 : A thread exited with outstanding lock acquisitions. 2 - The thread. 3 - Pointer to one of the outstanding owner entries. 0x15 : A thread exited with outstanding disowned lock acquisitions. 2 - The thread. 3 - Pointer to one of the outstanding owner entries. 0x16 : A call to ExConvertExclusiveToSharedLite was made by a thread that did not hold the specified resource exclusive. 2 - Pointer to the resource. 3 - Pointer to the thread.

原因

當前線程正在對快速資源例程執行無效調用。

解決方法

!analyze 調試擴展顯示有關 bug 檢查的信息，并有助于確定根本原因 。

另請參閱

Bug 檢查代碼參考